Installing The Memory - TYAN Toledo i3100 S5207 User Manual

2.13 – Installing the Memory
Before attempting to install any memory, make sure that the memory you have is
compatible with the motherboard as well as the processor. A Critical aspect to any system
build is whether you're using the recommended memory for your specific motherboard. For
compatibility information, please check Tyan's web site at:
The following diagram shows common types of DDR2 RAM modules:
Here are a few key points to note before installing memory into your S5207:
• Only Reg/ECC DDR2 400 MHz memory modules are supported.
• DIMM2 (the DIMM connector closest to the edge of the board, furthest from the
CPU socket) must be installed for the system to turn on and POST (power on self
test).
• ECC support.
• S5207 supports up to 4GB.
www.tyan.com
20
http://www.TYAN.com