Table of Contents
Advertisement
3.5.6 –ACPI Configuration Sub-Menu
Use this screen to select options for ACPI. Use the up and down arrow ( / )
keys to select an item. Use the Plus and Minus (+/-) keys to change the value of
the selected option. A description of the selected item appears on the right side
of the screen. The settings are described on this page. The screen is shown
below.
Main
Advanced
Advanced ACPI Configuration
ACPI Version Features
ACPI APIC Support
ACPI SRAT Table
AMI OEMB table
Headless mode
Feature
Advanced ACPI Configuration
ACPI Version Features
ACPI APIC Support
ACPI SRAT Table
AMI OEMB table
Headless mode
BIOS Setup Utility
PCI/PnP
Boot
[ACPI v2.0]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
Option
ACPI v3.0
ACPI v2.0
ACPI v1.0
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
52
http://www.tyan.com
Security
Chipset
Enable RSDP pointers
to 64-bit Fixed System
Description Tables. Di
ACPI version has some
← → Select Screen
↑↓ Select Item
+/-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Description
Set this value to allow or prevent
the system to be complaint with
the ACPI 2.0 specification.
This option allows you to define
whether or not to enable APIC
features.
Enable or disable the building of
ACPI SRAT Table.
Set this value to allow the ACPI
BIOS to add a pointer to an
OEMB table in the Root System
Description Table (RSDT) table.
Note: OEMB table is used to pass
POST data to the AMI code
during ACPI O/S operations.
Enable or disable Headless
operation mode through ACPI.
Exit
Advertisement
Table of Contents
