Siemens OpenStage 40 User Manual page 59

Step by step
Settings
User
Configuration
Incoming calls
Deflecting
Allow deflection
Yes
Default destination
Deflect to DSS: Yes
Permitting call deflection
z You can also configure this setting via the Web interface
page 184. Deflect" must be authorized by administra-
tor.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
j
Enter and confirm the phone number to which the sta-
tion should be deflected.
Entering a destination phone number is not man-
datory when call deflection is active. If you want
to deflect an incoming call, you are prompted to
enter a destination phone number if there is
none stored.
or Deflecting to a DSS number
A call can be deflected to a direct station selection
(DSS) subscriber using the DSS key, if the key is config-
ured and the deflect function is activated by your admin-
istrator
Information only, as set by administrator: Yes or No.
page 104.
Enhanced phone functions
59