Recording Conversations; Using The Call Recording Feature; Automatic Call Recording - Siemens OpenStage 40 User Manual

Call recording
Step by step
174

Recording conversations

Using the call recording feature

The recording function can be used in a similar way to a
recorder, for example for recording music. The recorder
can be:
switched on (standby .)
•
• switched off or stopped (~)
• started (/)
• paused (@)
The symbols used here by way of example can be found
on practically any hardware and software recorder.

Automatic call recording

This is the simplest mode. If you have accepted a call or
called a subscriber and the subscriber answers, the call
is recorded automatically. Refer to
which calls this can be.
|
As soon as the recording starts, you will see the
recording symbol
page 172).
You cannot pause the recording manually in this mode.
page 172 to check
and hear a beep (see also