Lenovo ThinkCentre M71e Hardware Maintenance Manual page 56

Machine types: 3129, 3132, 3133, 3134, 3136, 3140, 3141, 3143, 3146, 3147, 3150, 3154, 3156, 3157, 3166, 3167, 3169, 3171, 3175, 3176, 3177, 5033, 5036, 5039, 7338, and 7339
Hide thumbs Also See for ThinkCentre M71e:
Table of Contents

Advertisement

In the following index, X can represent any number.
Diagnostic Error Code
000-000-XXX BIOS Test Passed
000-002-XXX BIOS Timeout
000-024-XXX BIOS Addressing test failure
000-025-XXX BIOS Checksum Value error
000-026-XXX FLASH data error
000-027-XXX BIOS Configuration/Setup error
000-034-XXX BIOS Buffer Allocation failure
000-035-XXX BIOS Reset Condition detected
000-036-XXX BIOS Register error
000-038-XXX BIOS Extension failure
000-039-XXX BIOS DMI data error
000-195-XXX BIOS Test aborted by user
000-196-XXX BIOS test halt, error threshold exceeded
50
ThinkCentre Hardware Maintenance Manual
FRU/Action
No action
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Run Setup
2. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391
3. System board
1. Reboot the system
2. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391
3. Run memory test
4. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391
2. Adapter card
3. System board
1. Flash the system. See "Updating (flashing) the BIOS
from a disc" on page 391.
2. System board
Information only Re-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents