Chapter 6. Web User Interface; Access The Web User Interface; Provision The Intel Amt System; Logging Onto The Client System - Lenovo ThinkCentre M58p Manual

Chapter 6. Web user interface

Besides managing your computers by ISV solution (Management Software), you
can also perform some simple management action through Web user interface,
such as power controlling and asset inventory.
Intel ME provides a Web user interface, which enables you to check the status of
Intel AMT as well. If the Web user interface is not accessible, check your AMT
setup and configuration settings.

Access the Web user interface

Provision the Intel AMT system

To access the Web user interface, the AMT system must be configured first.
Complete the following steps to finish the configuration:
1. Press Ctrl+P to enter Intel MEBx. The default password is admin. Change the
2. Select Intel ME Configuration → Intel ME Features Control → Manageability
3. Select Intel AMT Confuration → Provision Model. Select Enterprise for
4. In the Intel AMT Configuration menu, select Host Name. Then input a host
5. In the Intel AMT Configuration menu, select TCP/IP. You will be prompted to

Logging onto the client system

The client system can be accessed from console on the network that has a
supported Web browser.
Open a Web browser on the management console system and type one of the
following in the address box:
v For SMB Mode:
v For Enterprise (TLS) Mode:
default password to your own.
Feature Selection → Intel AMT.
Enterprise mode or Small Business for SMB mode.
name, for example: LenovoM58p.
choose: Disable DHCP: (Y/N). If there is a DHCP server on the network, you
can press N, or press Y to set a static IP for your AMT machine. When DHCP
is enabled, you need to input the domain name as well. If DHCP is disabled,
input IP address (for example: 192.168.1.13), Subnet mask, and Default Gateway
address if needed.
Notes:
a. If Enterprise mode is selected, you will have to configure the PKI or the
PID/PPS before using the provision server to provision Intel AMT.
b. If DHCP is enabled, the host operating system of ThinkCentre M58p should
also be configured in DHCP mode. Intel AMT will share IP address with
the host Windows XP or Windows Vista
from the host operating system.
http:// IP_Address:16992 (example: http://192.168.1.13:16992)
https:// IP_Address:16993 (example: https://192.168.1.13:16993)
®
operating system. Get IP address
19