Chapter 5. Intel Amt Setup And Configuration Based On Lenovo Thinkcentre M58P; Associated Intel Amt Setup And Configuration In Bios - Lenovo ThinkCentre M58p Manual

Chapter 5. Intel AMT setup and configuration based on
Lenovo ThinkCentre M58p
The Management Engine BIOS Extension (MEBx) is a separate BIOS from the
normal system BIOS. It is an option ROM module provided by Intel. The MEBx
enables you to configure settings that control the operation of the Management
Engine (ME) that runs on the Intel AMT client, which must be set up and
configured in a system before use. Intel ME is an isolated and protected computing
resource. The Intel ME configuration should be completed through MEBx before
use. All changes to the ME platform configuration settings are not cached in MEBx.
The changes are committed to ME NVM until they exit from MEBx. If MEBx
crashes in the process of the configuration, the changes that have been made will
not be saved.
Note: To use the CIRA technology, you need not do any additional setup and

Associated Intel AMT setup and configuration in BIOS

Press and hold the F1 key during POST to enter the BIOS Setup Utility menu, and
then select Advanced → Intel AMT.
Confirm the default setting of the first option: AMT Enable = Enabled
The AMT Enable is used to enable or disable the Intel AMT.
Confirm the default setting: MEBx Reset = Disabled
This option enables or disables the MEBx settings to restore to the factory state
without entering MEBx setup screen.
Press CTRL+P to enter MEBx = Enabled
This option enables or disables the entrance of MEBx setup configuration menu.
configuration in MEBx. You only need to configure your computer in MEBx
for SMB or Enterprise mode, then use the CIRA through ISV applications.
9