HP ML570 - ProLiant - G2 Tuning Manual page 11

Novell NetWare 6 performance tuning guidelines for ProLiant servers
To monitor disk activities using the NRM tool, follow these steps:
1. Open the NRM, and then select Health Monitor listed under the Diagnose Server
category to display the following screen.
Note: For detailed instructions on how to invoke the NRM, refer to the NetWare
Remote Manager section of this document.
2. Check Disk Throughput (as shown in the figure above) and click Apply.
3. Click on Disk Throughput for a graphical display of the Disk Throughput information
as shown in the next figure.
11