Citizen CBM1000II Command Reference Manual page 43

ESC S
[Function]
[Code]
[Outline]
[Caution]
[See Also]
Selecting STANDARD MODE
<1B>H<53>H
Switches from PAGE MODE to STANDARD MODE.
• This command is only effective if it is entered when in PAGE
MODE.
• Any data mapped in PAGE MODE is erased.
• After this command is executed, the beginning of the line is
taken as the next print start position.
• The print area defined by ESC W is initialized.
• The commands listed below, which have separate settings for
STANDARD MODE and PAGE MODE, are changed to the
settings for STANDARD MODE use.
(1) Spacing setting:
(2) Line feed width setting: ESC 2, ESC 3
• STANDARD MODE is selected when the printer is turned on
or reset,or when ESC @ is executed.
FF, ESC FF, ESC L
— 41 —
ESC SP