Citizen BD2-2220 Command Reference Manual page 78

When sending print data, note these points:
(1) Each string of bar code data must begin with a code set select character (CODE A,
(2) Every special character is specified by a combination of two characters: a brace "{"
<Example>
• If the printer finds a string of bar code data that does not begin with a code set select
• If the printer received a character that is not available in the currently selected code
• An HRI character corresponding to either a Shift character or a code select character
[Sample Program]
[Print Results]
CODE B, or CODE C), which selects the first code set to use.
followed by one character. A brace "{" itself is sent twice consecutively.
Special characters
Hex.
7B53
7B41
7B42
7B43
7B31
7B32
7B33
7B34
7B7B
To print "No." in code set B, followed by "123456" in code set C, send the following
data string:
GS k <73> <10> <7B>H <42>H, "No." <7B>H <43>H <12> <34> <56>
character, it immediately aborts the command processing and handles the
subsequent data as normal data.
set, it immediately aborts the command processing and handles the subsequent
data as normal data.
is not printed. An HRI character for either a function character or a control character
is treated as a space character.
LPRINT CHR$(&H1D);"H"; CHR$(2);
LPRINT CHR$(&H1D);"k";
LPRINT CHR$(4);
LPRINT "123"; CHR$(0);
* 1 2 3 *
When the data "123" is printed with the code 39
ASCII Code Set A
{ S SHIFT
{ A –N/A
{ B CODE B
{ C CODE C
{ 1 FNC1
{ 2 FNC2
{ 3 FNC3
{ 4 FNC4
{ { ' { '
- 76 -
Code Set B Code Set C
SHIFT –N/A
CODE A CODE A
–N/A CODE B
CODE C –N/A
FNC1 FNC1
FNC2 –N/A
FNC3 –N/A
FNC4 –N/A
' { ' ' { '