Table of Contents
Advertisement
• NEVER wipe the meter with thinner or benzene, as they may
damage it.
• Dispose batteries according to local regulations.
• This product is designed for use over an extended period of time;
however, it is generally recommended that it be inspected every
two years to ensure proper function and performance,
• When the meter is very dirty, wipe it clean with a cloth moist-
ened with a neutral detergent, and then wipe it with a dry cloth.
• Please wipe the cuff with moist cloth. Hard rubbing will cause air
leakage. Also, be careful not to get water into the air hose.
Nature and frequency of maintenance:
This products is designed for use over an extended period of time;
however, it is generally recommended that it be inspected every two
years to ensure proper function and performance.
Protect the nature environment:
Please help protect natural environment by respecting national and/
or local recycling regulations when disposing of the batteries and
the products at the end of their useful lives.
Reference European standard:
This products complies with EC instructions 93/42/EEC (Medical
Device Directive) and with the following standards: EN 1060-1 :
1995 "Noninvasive Sphygmomanometers, Part 1 General Require-
ments" and EN 1060-3 : 1997 "Noninvasive Sphygmomanometers,
Part 3 Supplementary Requirements" for Electromechanical Blood-
Pressure Measuring Systems.
Manufacturer:
Name:
Premier Precision Ltd.
Address:
Block E, G-H, 6
Phase 2, Yip Fat Factory Building,
73-75 Hoi Yuen Road,
Kwun Tong, Kowloon, Hong Kong
European Representative:
Name:
WvW elektronische Geräte Vertrieb GmbH.
Address:
Robert-Koch-Straße 20,
D-80538 München,
GERMANY
- Eng 5 -
th
floor,
Advertisement
Table of Contents
