AEG LAVAMAT 50600 Operating Instructions Manual page 22

Run wash cycle
• SOAKING
After soaking separately, the water must be pumped out first and then
3
the main wash cycle can be set as desired:
0 Release the SOAKING button,
or
rotate the program selector clockwise to PUMP OUT (water is pumped
out).
0 Subsequently set the main wash cycle as desired.
After Rinse Hold:
After a Rinse Hold the water must be pumped out first or the washing
spun:
0 Release RINSE HOLD button.
0 Rotate the program selector clockwise to SPIN or SHORT SPIN (washing
becomes spun according to the program group selected and the final
spin speed set),
or
rotate program selector clockwise to PUMP OUT (water is pumped out).
After the program is completed:
0 Open the door.
0 Remove the washing.
0 Push in the program selector.
The indicator ON light is extinguished. Washing machine is off.
0 After the program has finished, pull the detergent drawer out a little so
that it can dry. Leave the door ajar for a while. This helps to prevent
stagnant smells and helps to preserve the door seal.
0 Close the water tap.
0 We recommend you unplug the appliance and turn off the water
supply when the wash program has finished.
22