Plug The Cash Register Into A Wall Outlet; Insert The Mode Key Marked "Pgm" Into The Mode Switch; Turn The Mode Key To The "Reg" Position; To Set The Ink Ribbon - Casio CE-250 Operator's Instruction Manual

Getting Started
5.
6.
Turn the mode key to the
"REG" position.
The display should change to the following.
7.

To set the ink ribbon

8
4.

Insert the mode key marked "PGM" into the mode switch.

About the mode key and mode switch, please refer to page-18, 19.
PGM
OP
A-A08
A-A08
1 1 1 1 1
Remove the printer cover.
2 2 2 2 2
Remove the inner cover.

Plug the cash register into a wall outlet.

Be sure to check the sticker on the side of the cash
register to make sure that its voltage matches that of the
power supply in your area. The printer will operate for
a few seconds.
CAL
REG
OFF
RF
PGM
X
Z
Z
CAL
REG
OFF
RF
PGM
3 3 3 3 3
Load a new ink ribbon
cassette into the unit.
4 4 4 4 4
Turn the knob on the left
side of the cassette to take
up any slack in the ribbon.
Knob
X
Z