Zooming; Locating Desired Scene - Sansui HDLCDVD260A Owner's Manual

Zooming/Locating desired scene
NOTE:
• You can select the Pause, Slow or
Search playback in the zoom mode.
• Some discs may not respond to zoom
feature.
46

Zooming

This unit will allow you to zoom in on the frame image. You can then
make selections by switching the position of the frame.
1
Press ZOOM during playback.
The center part of the image will
be zoomed in.
Each press of ZOOM will change
the ZOOM magnification
1.3), 2 (x 1.5) and
2
Press ▲/▼/◀/▶ to view a different part of the frame.
You may move the frame from the center position UP, DOWN,
LEFT or RIGHT.
3
In the zoom mode press ZOOM repeatedly to return to a 1:1
view ( Off).

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the
desired point to play back.
1
Press JUMP during playback or
resume stop mode.
2
Press ▲ or ▼ to select the "Time", "Title/track" or "Chapter".
3
Press Number buttons (0–9) to input the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
4
Press ENTER.
• Playback starts.
• When you change the title, playback starts from Chapter 1 of
the selected title.
• Some discs may not work in the above operation.
1 (x
3 (x 2.0).
Jump
Title
Chapter
Time
1