What To Do If; Trouble Shooting - AEG OKO-LAVAMAT 76669 update User Information

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following
checks before contacting your local AEG Service Force Centre.
Important: If you call out an engineer to a fault listed below, or to re-
pair a fault caused by incorrect use or installation, a charge will be
made even if the appliance is in guarantee.
• If the fault code C1, C2 or Cd is shown in the
multi-display, you may be able to remedy the
fault yourself (see the Faults table below).
When you have remedied the fault, press the
START/PAUSE button.
• With all other displayed faults (C plus number or letter): switch appli-
ance off and on again. Reset the wash programme and press the
START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service
department quoting the fault code.
Problem
The washing machine
does not work.
Door cannot be closed. The child safety feature is set
The fault code
pears. The displays PRE
WASH, RINSE and
RINSE+ are flashing.
Possible Cause
The mains plug is not
plugged in.
The house fuse has blown.
The door is not correctly
closed.
START/PAUSE button not
pressed long enough.
Cd
ap-
The door is not correctly
closed.
Operating Instructions
Remedy
Plug in the mains plug.
Replace the fuse.
Close the door; The lock must
engage audibly.
Keep the START/PAUSE but-
ton pressed until the pro-
gramme begins.
Cancel the child safety fea-
ture (see Section "Child
Safety Feature").
Close the door correctly.
Start the programme again.
31