Opening And Closing The Door; Loading The Washing - AEG OKO-LAVAMAT 76669 update User Information

Soak time
If the SOAKING button is pressed you can use the DELAY TIMER button
to increase the soak time by 1 to a maximum of 19 hours.
Without the delay timer, the soak time is approx. 1 hour.
3

Opening and closing the door

Open: Pull the handle on the door.
0
0 Close: Press the door firmly closed.
The displays DOOR and START/PAUSE
show when the appliance is switched
on whether the door can be opened:
DOOR Indicator
lights up green
lights up red
1) The door is locked because of a high water level or high temperature
If
3
– the the error code Cd appears in the multi display,
– and the PRE WASH, RINSE and RINSE+ displays are flashing,
an attempt was made to start a washing programme without the door
being correctly closed. In this case, press the door firmly closed and
start the washing programme again.

Loading the washing

See "Programme Tables" for maximum loads.
3
For information about the correct preparation of the washing see "Sort
and prepare washing".
0 1. Sort and prepare the washing according to type.
2. Open the door: Pull the handle on the door.
3. Load the washing.
Important! Do not trap washing when
closing the door. The fabrics and the ma-
chine could be damaged.
4. Close the door firmly.
Display START/PAUSE
flashes red
lights up red
Operating Instructions
Door opening possible?
yes
1)
no
21