Switching On The Appliance For The First Time - Setting The Language - AEG 1600 User Information

Switching on the appliance for the first time
– setting the language
When switching on the appliance for the first time you must set the
language in which you want the indicators in the display to appear.
1. Turn the appliance on by
pressing the control knob so
that it is no longer flush in
the control panel.
The display in the middle of
the control panel will illumi-
nate, and the appliance is
switched on. The selection of
possible languages will appear in the right of the display.
Important: If the display is not showing any languages, the appliance
has already been switched on once. In such case, go to the chapter
"Change languages" if you would like to change the language setting.
2. Turn the knob until the de-
sired language is highlight-
ed by the frame.
3. Press the SELECT button.
A tick will appear next to the
highlighted language. All in-
dicators in the display will
appear in this language from
now on.
4. Press the control knob to
switch off the appliance.
When the appliance is
switched on again all indica-
tors in the display will ap-
pear in this language.
3
Before starting a wash cycle, please first read the chapter "Before the
first wash".
EXTRAS
SPRACHE
Í
ANWÄHLEN
ENGLISH§
DEUTSCH)
ZURÜCK
ITALIANO§
FRANÇAIS§
EXTRAS
LANGUAGE
Í
SELECT
ENGLISH!)
DEUTSCH§§
BACK
ITALIANO§§
FRANÇAIS§§
EXTRAS
LANGUAGE
Í
SELECT
ENGLISH!)
DEUTSCH§§
BACK
ITALIANO§§
FRANÇAIS§§
§
§§
§§
9