HP Kayak XA 05xx Implementation Manual page 26

2 How to Create a Deployment Database
Creating and Modifying Configuration Profiles using the Configuration Wizard Utility
2 To create a new configuration profile, click on Add. A window
will appear prompting you to enter the name of the new profile (up
to 8 characters in length). A suffix of ".ini" is automatically added to
the profile names you enter. For example, if you type "PROFILE1",
the profile will be stored in the file profile1.ini.
If you wish to modify an existing profile, select the name of the
profile you wish to modify and click Modify.
If you wish to duplicate an existing profile, select the profile
you wish to duplicate, and click Duplicate. You will be prompted to
name the new profile.
To remove a profile, select it and then click Remove.
3 After having chosen to create a new profile, or modify an existing
one, the Configuration Wizard will open up a new window with five
1
tabs (shown below). Each of these tabs contains fields in which to
enter the information that defines the configuration profile.
22 English