Laser Safety Warnings; Compliance With Cdrh Regulations; Compliance With International Regulations; Laser Product Label - HP DL320 - ProLiant - G3 Setup And Installation Manual

Hp proliant dl320 generation 2 server setup and installation guide
Hide thumbs Also See for DL320 - ProLiant - G3:
Table of Contents

Advertisement

Regulatory Compliance Notices

Laser Safety Warnings

WARNING: To reduce the risk of exposure to hazardous radiation:

Compliance with CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.

Compliance with International Regulations

All HP systems equipped with laser devices comply with appropriate safety standards
including IEC 825.

Laser Product Label

The following label or equivalent is located on the surface of the HP supplied laser
device.
A-6
Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
Allow only HP authorized service technicians to repair the laser device.
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
This label indicates that the product is
classified as a CLASS 1 LASER PRODUCT.
This label appears on a laser device installed
in the server.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl320 g2

Table of Contents