Backup And Recovery - Lenovo ThinkCentre M50e Quick Reference

Note: Your Microsoft Windows license permits you to create only one set of
Product Recovery discs, so it is important that you store the discs in a
safe place after you make them.
To create Product Recovery discs, do the following:
1. From the Windows desktop, click Start -> Programs (or if you are using
Windows XP, click All Programs), -> Access IBM-> Create Product
Recovery discs.
2. Follow the instructions on the screen.
To use Product Recovery discs, do the following:
Attention: When you restore the factory contents from the Product Recovery
discs, all files currently on the hard disk will be deleted and replaced with the
original factory contents.
1. Insert the Rescue and Recovery disc into your CD or DVD drive.
2. Restart your computer.
3. After a short delay, the Rescue and Recovery workspace opens.
Note: If the Rescue and Recovery workspace fails to open, you might not
have your startup device (CD drive or DVD drive) set correctly in
your BIOS startup sequence. See "Setting a rescue device in the
startup sequence" on page 18 for more information.
4. In the Rescue and Recovery menu, click Restore your system (or Restore
factory contents for some models).
5. Follow the instructions on the screen. Insert the appropriate Product
Recovery disc when prompted.
Note: After restoring your hard disk to the original factory content, you might
have to reinstall some software or drivers. See "Post-recovery notes" on
page 15 for details.

Backup and recovery

The Rescue and Recovery program enables you to back up your complete hard
disk contents including the operating system, data files, application programs,
and personal settings. You can designate where the Rescue and Recovery
program stores the backup:
v On a protected area of your hard disk
v On a second hard disk installed in your computer
v On an externally attached USB hard disk
v On a network drive
12
Quick Reference