Disc Scan; To Display Cd Titles - Alpine TDA-7547E Owner's Manual

1
F
2
SCAN
3
F
1
1
TITLE
Title not entered
2
1 3
6
--------
CD Shuttle Operation

Disc Scan

Press the "F" button*. The function indicator will
turn off.
* In the 12-disc CD Shuttle mode, press this
button twice.
Press the SCAN button to play the first 10 seconds
of each track on the disc. The display shows the
disc number, elapsed time, "SCAN", and track
number being played during scan play.
Press the SCAN button again to cancel scan play
and resume normal play.
Note: Setting should be performed within 5
seconds after the "F" button is pressed.
The unit will automatically return to the
normal mode 5 seconds after pressing the
button.
Press the "F" button to activate the normal
mode. The function indicator will illuminate.

To display CD Titles

Titles can be displayed for CDs with titles
entered.
(Refer to page 38 to title the disc.)
Press the TITLE button in the CD mode.
The display will be switched each time the
switch is pressed.
T08 11'03
D-3
T08 12:58
D-3
ALPINE
D-3
English
Title entered
37