Automatic Memory Of Station Presets - Alpine TDA-7547E Owner's Manual

1
2
3
1
SOURCE
A.S.U.
2
BAND
PROG
3
TUNE·A. ME
Automatic Memory of
Station Presets
Press the SOURCE button until radio frequency
appears in the display.
90.10
TAPE
Press the BAND button repeatedly until the
desired radio band is displayed.
F 1
F 2
AM
Press and hold the A. MEMO button for at least
2 seconds. The frequency on the display
continues to change while the automatic
memory is in progress.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
A-MEMORY
signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored
in the preset location No. 1.
Note: If no stations are stored, the tuner will
Radio Operation
return to the original station you were
listening to before the auto memory
procedure began.
English
19