Operating Instructions; Helpful Hints And Tips - Zanussi ZIE6004F User Manual

Display
Residual heat indicator
Warning! Risk of burns from residual heat!

Operating instructions

Use the induction cooking zones with suitable cook-
ware.
On and Off
Touch for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a
cloth, etc.) for longer than 10 seconds.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch to increase the heat setting. Touch
crease the heat setting. The display shows the heat set-

Helpful hints and tips

Cookware
• The bottom of the cookware must be as thick
and flat as possible.
• Cookware made of enamelled steel and with alumini-
um or copper bottoms can cause discoloration on
glass ceramic surface.
A cooking zone is still hot (residual heat)
The automatic switch off is active
Cookware unsuitable or too small or no cookware on the cooking zone
.
-
6 hours 5 hours
to de-
Description
The induction cooking zones make the heat directly in
the bottom of the cookware. The glass ceramic is heated
by the residual heat of the cookware.
• the hob gets too hot (e.g. when a saucepan boils
dry). Before you use the hob again, the cooking zone
must be cool.
• you use incorrect cookware.
play and after 2 minutes the cooking zone stops auto-
matically.
• you do not stop a cooking zone or change the heat
setting. After some time
stops. See the table.
-
4 hours
ting. Touch and
the cooking zone.
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
comes on in the dis-
comes on and the hob
-
1.5 hours
at the same time to switch off
7