Select The Required Programme; Start The Machine; At The End Of The Programme - Zanussi FLS 571 C Instruction Booklet

Front-loading washing machine
Table of Contents

Advertisement

4. Select the required programme

Turn the programme selector dial CLOCKWISE to the
required programme.

5. Start the machine

Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the door and the detergent dispenser drawer are
closed.
Pull the programme selector selector dial outwards, the
operating pilot light will illuminate and the machine will
start operating.

6. At the end of the programme

The machine stops automatically and the operating pilot
light goes out.
The door is controlled by a safety device which releases
3 minutes after the end of the programme.
Before opening the door ensure there is no water in
the drum.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
P0215
P0216
7 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl501

Table of Contents