Canon CANOSCAN FB1210U Service Manual page 79

CHAPTER 5
* Scan count
Set a number from 1 to 100.
* Resolution (dpi)
When the resolution for scanning an image is selected at 200, 300, 400, or 600 dpi, whole
document glass area is scanned. When selected at 1200 dpi, 10,280 pixel x 500 pixel area in
the upper side of the document glass is scanned.
* Image handling
When "Read in memory (no file)" is selected, the image is read into the memory, then
abandoned after readout. When "Save to TIFF file" is selected for handling an scanned image,
the file of "img0.tif" is saved in the folder of the Canon Scanner Test. When scan count is set
at 2 or more, the file of "img0.tif", "img1.tif", "img2.tif" ... are saved.
File space to be saved is as follows.
200 dpi : 11.3 MB
300 dpi : 25.6 MB
400 dpi : 45.5 MB
600 dpi : 102.4 MB
1200 dpi : 14.6 MB
Note : Confirm before scanning that the available disk space on the HDD in which the
Canon Scanner Test is installed exceeds above file space.
5 - 14
Figure 5-14
©
COPYRIGHT 2000 CANON INC. CANOSCAN FB1210U REV.0 APR. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)