Canon CANOSCAN FB1210U Service Manual page 52

4) Remove two screws that fix the gear plate 2 on the sliding rod to remove the gear plate 2 and
spring.
q Screw
w Gear Plate 2
e Spring
r Sliding Rod
Note: When fixing the gear plate 2 on the sliding rod, use the spring to adjust the drive belt
tension.
©
COPYRIGHT 2000 CANON INC. CANOSCAN FB1210U REV.0 APR. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 3-8
CHAPTER 3
1
2
3
4
3 - 9