Table of Contents
Advertisement
Operating the Camera with the Viewer
Camera pan and tilt can also be freely controlled with the viewer. By clicking the viewer image,
the camera can be oriented to make that position the center of the image.
e
Tip
c
Note
60
There are another settings to enable pan, tilt and zoom operations with the viewer.
With the viewer selected, choose Properties from the File menu and check the
"Control a camera with arrow buttons" radio button under Camera Control. Set
the mouse cursor over the viewer. There are eight arrows, such as the up arrow at
the top of the screen and the down arrow at the bottom of the screen, for making
changes with the mouse cursor. There are also two central buttons, plus on the
left and minus on the right, for making changes with the mouse cursor. In each
case click and hold to enable pan, tilt and zoom operations.
If there is an icon showing camera-with-scope in the camera source window, the
scope will change to match the variations in camera pan and zoom as the camera
is operated.
Click on the viewer to make that position the center
Orientation of the icon changes
to match pan changes
Scope length vary in accordance
with zoom changes
Advertisement
Table of Contents
