Canon WebView LivescopeMV User Manual page 105

e
Camera Control Right Levels
Tip
The three types of camera control right level are MV Level, MV Level 2 and Free
Viewer Level. The choice between them should be made in accordance with your
purpose. Free Viewer is the viewer provided with the camera server product such as
the Viewer for Java (previous name: Java Viewer), Viewer for PC (previous name:
Helper Viewer), etc.
Besides these three types, there is also the Admin Viewer Level. The Admin Viewer
Level is the camera control right level that is applied if the camera server is accessed
from the Admin Viewer (the viewer provided with the camera server product) and has
priority over the MV Level, MV Level 2 and Free Viewer Level. For more information
about the Admin Viewer, see the manual supplied with the camera server.
MV Level
• If you wish to use all MV functions, choose MV Level.
• So long as there is no other client using Admin Viewer Level and MV Level, the
control right can be maintained for an unlimited period. If another client is connected
to the same camera server, the control right will move to the one connected later.
The control right cannot be obtained, however, if there is a client connected at the
Admin Viewer Level or MV Level 2.
• Some of the features of the Video Relay may be unavailable or camera control may
be limited while motion detection is being notified from the VB150 (see p. 80).
MV Level 2
• MV Level 2 is the camera control right level that has priority over MV Level and the
camera can be controlled irrespective of motion detection. If MV Level is being used
and motion detection is notified from the camera server, MV Level cannot take the
camera control right from motion detection since motion detection has priority over
MV Level. In this event, use MV Level 2 to temporarily obtain camera control right.
High priority
• The motion detection function will be limited in MV Station (see p. 83).
Free Viewer Level
• The period for maintaining the control right is limited to the period that is set in the
camera server.
• Control right at Free Viewer Level cannot be obtained if there is a user connected at
Admin Viewer Level or MV Level.
• Auto Preset Tour cannot be operated.
• External device input/output control cannot be operated.
• VBImageBrowser cannot be started up.
Admin Viewer
MV Level 2
Motion Detection
MV Level
Free Viewer Level
Other Advanced Settings
105
7