Installing Printer Driver Without A Usb Connection - Canon FAXPHONE L170 Software Manual

Installing Printer Driver without a USB Connection

The following is the installation procedure of the user software without using a USB connection, under Windows 98/Me/
2000/XP. The screen shots shown are from Windows 2000.
Before you install the software, make sure you do the following:
•
Connect the machine to your computer. (See the Basic Guide.)
•
Turn on the machine. (See the Basic Guide.)
•
If any Windows application is running on your computer, quit it.
IMPORTANT
•
If your computer has no printer driver installed through a USB connection, follow the steps in "Installing Printer Driver through a USB
Connection," on p. 2-2 first, then continue this procedure.
•
If Plug and Play is automatically carried out and the [Found New Hardware Wizard] dialog box appears, click [Cancel] to follow the
procedure below.
•
If the machine has no power supplied when the installation starts, the installation may not complete successfully.
•
If you are using Windows 2000/XP, be sure to log on as a member of Administrators. The full control access right for the printer is
necessary for the installation of CARPS.
1
Place the CD-ROM into your CD-ROM drive.
The CD-ROM menu is displayed.
NOTE
•
If the CD-ROM does not apper automatically, select "Run" from the "Start" menu, type D:\CSplash.exe (if your CD-ROM drive is drive D:) in
the command line and click "OK."
2
Click [Install Printer Driver].
The Setup Wizard starts.
3
Click [Next] on the Setup Wizard dialog box.
Installing the Printer Driver on Your Computer
2
2-5