Canon SmartBase MPC400 Parts Catalog page 4

II. ABOUT THIS MANUAL
1. ILLUSTRATION INDEX
For illustration index, the parts layout illustrations in
this parts catalog are listed in
abbreviated form in order of illustration number to
identify the pages they appear on. To find an
illustration of a part, see the ILLUSTRATION INDEX.
2. PARTS LAYOUT & PARTS LIST
Parts layout illustration
a) Parts search
Find a part from the parts layout illustration and
find its key number from the parts list to identify
the part number and name.
Further, screws, nuts, washers, grip rings, pins and
spacers are mentioned in the parts list.
Note: If parts have the same or similar shape but
different specifications,
their key number is assigned to several part
numbers and names in the parts list.
b) Parts replacement procedure
The parts layout illustrations are arranged according
to the disassembly procedure of the product.
When a unit in the illustration can be disassemble
further, a reference illustration page of the
disassembly will be included.
Parts where grease is to be applied are displayed as
"Lubrication". When replacing parts, or if grease
has accidentally been wiped off, refer to "4".
(Lubrications), and reapply the grease.
The letters ( A , B etc.) in the illustration indicate
the connection locations of cables and screws.
Parts list
a) FIGURE & KEY No.
The FIGURE & KEY No. column corresponds to
the key numbers assigned to the parts in the parts
layout illustration.
It also corresponds to the part locations printed on
the PC board.
b) PART NUMBER
The PART NUMBER column gives the part
numbers corresponding to the key numbers. To
order a part, indicate the part number clearly.
Note: Parts marked NPN are not service parts.
c) RANK
The service parts with N in the RANK column are
order parts.
d) QTY
The QTY column gives the number of parts in the
corresponding components layout illustration.
e) DESCRIPTION
The DESCRIPTION column gives the part names
in English.
To order a part, indicate the part name, too.
3. TOOL
This is a list of tools used for servicing products.
4. LUBRICATIONS
Where grease is to be applied in order to allow moving
parts to work smoothly, and to increase conductivity,
the type and amount of grease to be used will be
mentioned.
5. NUMERICAL INDEX
All the parts listed in this parts catalog are arranged in
order of part number. You can identify part locations
and names from the NUMERICAL INDEX.
II