Canon LBP-800 Service Manual page 58

CHAPTER 1
b. Installation Procedures
Connecting the printer as a local server
This section describes how to install CAPT for using this printer as a local printer. Install it by
following the procedures below.
For details, see the User's Manual packed with this printer.
1. Switch on the PC to which the printer is connected to start up Microsoft Windows 95/98.
2. Perform one of the following methods to start up Add Printer Wizard.
• Start button /Settings / Printers / Printers folder / Open the Add Printer.
• My Computer / Printers folder / Open the Add Printer.
• Explorer / Desktop / My Computer / Printers / Open the Add Printer.
3. Add Printer Wizard (Initial screen)
Select either to use this printer, as a local printer or network printer. The following proce-
dures describe the installation for using the printer as a local printer by selecting the Local
Printer. For using the printer as a network printer, see Page 1-51 for details.
4. Add Printer Wizard (Printer selection 1)
Insert the CD-ROM into the PC, and click on the Have Disk button to open the Install From
Disk screen.
Enter the name of the CD-ROM drive to the Copy manufacture's files from text box, and click
the Browse button.
5. Add Printer Wizard (Printer selection 2)
When the name of this printer appears in the Printers list box, confirm that it is selected,
and then click the Next button. When you want to change the printer to be installed, click
the Have Disk button to reselect the INF file.
6. Add Printer Wizard (Overwrite selection)
This window appears only when the same driver has already been installed. Select whether
or not the existing driver is to be overwritten by a newly installed driver.
7. Add Printer Wizard (Port selection)
Select the port to which the printer is connected.
Click on the Configure Port button to open the Configure LPT Port dialog box, and check the
Spool MS-DOS print jobs check box.
8. Add Printer Wizard (Printer name change)
Enter the name of this printer to the Printer Name text box. Select whether or not the print-
er is to be a default printer.
9. Add Printer Wizard (Test Page Printing Selection)
Select whether or not to print a test page after you have finished installing CAPT.
10. Coping Files
When the installation begins, the Coping Files dialog box appears.
11. End of installation
Click on the OK button to finish the installation. If you have selected to print a test page
after installation, confirm that the installation has completed by printing a test page.
1 - 50