Maintenance; Cleaning; Replacing; Disposing - Philips HDT8520 Manual

Press to save your changes and return to
the previous menu.
To check the signal quality of any channel
that you are receiving, press to highlight
Signal quality and press or OK.
In the Signal quality test menu that
appears, use / to select a channel that
you want to check. Press or BACK
return to the previous menu.
To turn on or off powering your active-
indoor antenna using the Antenna IN
connector on the rear panel of your HD
recorder, press to highlight Portable
antenna powering and press or OK.
Use / to highlight Off or On.
Press to save your changes and return to
the previous menu.
Note
Set Portable antenna powering to On
only if you need to power an active-indoor
antenna that requires a 5 V power supply
not exceeding 50 mA current consumption.
Be sure to read your indoor antenna's user
manual before turning this setting on.
To control antenna output, press to
highlight Antenna output and press or
OK. Use / to highlight Inactive in eco
mode or Always active.
Press to save your changes and return to
the previous menu.
Note
If Antenna output is set to Inactive
in eco mode while Portable antenna
powering is set to On, the device(s)
connected to the To TV/VCR output will
not receive the antenna signal.
To see information about your HD recorder,
press and highlight System information.
Details such as software version, model
number, serial number, etc., are displayed on
the right.
To see the available space on your HD
recorder's hard-disk drive, press and
highlight Hard disk drive information.

Maintenance

To format your HD recorder's hard disk, press
to highlight Factory reset and press
or OK. Press
disk and press OK. In the menu that pops up,
press the green button to confirm, or the red
button to cancel and return to the previous
menu.
to Press or BACK
Settings menu.
6 Maintenance
6.1

Cleaning

For cleaning, use a soft, damp (not wet) cloth.
Never use any abrasive cloth and aerosol
cleaners
6.2

Replacing

Your HD recorder does not contain any user-
serviceable parts. Do not attempt to open it.
All maintenance work must be carried out by
qualified service centres.
6.3

Disposing

Your HD recorder is designed and manufactured
with high-quality materials and components,
which can be recycled and reused.
Please inform yourself about the local separate
collection process for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. The correct disposal
of your old product will help prevent potential
negative consequences for the environment and
human health.
to highlight Format hard
to return to the
33