Table of Contents
Advertisement
Emptying and Cleaning the Dust Collector
1.
Press the button on the
2.
... lift off the lid.
rear side of Trilobite, and ...
Cleaning the Roller
1.
Check the roller each time
2.
Turn Trilobite upside down
the dust collector is
and put it on a soft surface
emptied. Begin by lifting
with the display facing you.
Trilobite by the handle.
14 English
3.
Take out the dust collector.
4.
Remove the grille with the
opening facing up.
3.
Push the locking knob to
4.
Raise the cover.
the right.
5.
Empty the collector
(prefer ably in a plastic bag
fit snugly around the unit).
Do not knock the
col lector against hard
surfaces to empty it.
Always replace with
a new filter.
5.
Lift the roller by the end
without a drive belt.
Remove it by holding it
at an angle and pulling
upwards/outwards.
Hide quick links:
Advertisement
Table of Contents
