Advertisement
2)
After checking TOC, use the [MENU] dial
to select "<<Back" and press the [ENTER]
key.
The display returns to the USB HOST menu
selection screen. You can finalize the disc by
selecting "CD Finalize>".
<Note>: The following shows the screen
example when you burn multiple WAV files.
You can check the playing time of each
track as well as the disc remaining time.
Viewing TOC after completing "CD Finalize"
1)
Close the tray of the CD-R/RW drive
(because after finalizing the disc, the tray
opens).
You can close the tray by pressing the eject key or
push the tray lightly.
<Note>: When you close the tray, the ac-
cess indicator starts flashing while the drive
is reading the disc. Therefore, do not carry
out the next operation until the drive stops
accessing and the access indicator gets
unlit.
2)
Use the [MENU] dial to select "CD TOC>"
and press the [ENTER] key.
As with viewing the TOC after "CD burn"
operation, the display shows "Please Wait",
followed by TOC.
However, in this case, the remaining time is shown
as "00h00m00s", which means no more tracks can
be recorded.
<Note>: The following shows the screen
example when you burn multiple WAV files
and finalized. You can check the playing
time of each track as well as the disc re-
maining time. In this case, the remaining
time is also shown as "00h00m00s".
3)
After checking TOC, use the [STOP] key to
exit the MENU mode.
The display returns to the Home screen.
<Note>: You can also view the TOC of a com-
mercially available audio CD, as with an audio
CD you made using the MR-8HD. To do this, set
an audio CD to the CD-R/RW drive and carry out
the same operation as described above using
the "USB HOST" menu in the MENU mode.
Note that you can view only the playing time of
each track. You cannot view track titles.
7
Advertisement
