* Detailed cooling capacities are based on indoor and outdoor unit at the same elevation per ARI standard 210/240-94. If additional tubing length and/or
indoor unit is located above outdoor unit, a slight variation in capacity may occur.
† Total and sensible capacities are net capacities. Blower motor heat has been subtracted.
‡ Sensible capacities shown are based on 80°F (27°C) entering air at the indoor coil. For sensible capacities at other than 80°F (27°C), deduct 835 Btuh
(245 kw) per 1000 CFM (480 L/S) of indoor coil air for each degree below 80°F (27°C), or add 835 Btuh (245 kw) per 1000 CFM (480 L/S) of indoor coil air
per degree above 80°F (27°C). When the required data falls between the published data, interpolation may be performed.
** Unit kw is outdoor unit kilowatts only.
†† At TVA rating indoor condition (75°F edb/63°F ewb). All other indoor air temperatures are at 80°F edb.
‡‡ Data are with FC4 and FK4 R-22 TXV replaced with Puron® TXV.
DETAILED COOLING CAPACITIES* Continued
CONDENSER ENTERING AIR TEMPERATURES °F
85
Capacity
Capacity
Total
MBtuh†
MBtuh†
Sys
Total Sens‡
Kw**
Total Sens‡
533AN060-A Outdoor Section With CK5AA060 Indoor Section
4.50
64.6
31.8
4.99
61.6
4.44
59.7
40.6
4.91
56.7
4.32
51.6
37.8
4.77
47.6
4.30
50.5
47.1
4.75
46.7
4.25
47.8
47.8
4.70
46.1
4.58
65.4
32.8
5.08
62.4
4.52
60.8
42.8
5.01
57.4
4.41
52.6
39.9
4.87
50.4
4.40
51.8
50.1
4.85
49.7
4.36
51.2
51.2
4.84
49.4
4.67
66.0
33.7
5.16
62.9
4.60
61.5
44.6
5.09
58.0
4.51
53.9
42.1
4.96
52.9
4.49
54.7
53.9
4.97
52.5
4.48
54.1
54.1
4.97
52.3
Multipliers for Determining the Performance With Other Indoor Sections