Auto Crop - Brother MFC-J425W Software User's Manual

Scanning

Auto Crop

You can scan multiple documents placed on the scanner glass by checking Auto Crop. When using
Auto Crop, the machine will scan each document and create separate files. For example, if you place three
documents on the scanner glass, the machine will scan and create three separate files. If you want to create
a three page file, scan the documents as PDF.
1 0.4 in. (10 mm) or greater
2 0.8 in. (20 mm) or greater (bottom)
Guidelines for Auto Crop
 This setting is only available for documents that are rectangular or square.
 If your document is too long or wide, this setting does not work properly.
 When you use this setting, you must use the scanner glass.
 When you use this setting, you must choose a Document Size other than Auto.
 You must place the documents away from the edges of the scanner glass as shown in the illustration.
 You must place the documents at least 0.4 in. (10 mm) apart from each other.
 Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more
than 10 degrees, this setting will not work.
 Auto Crop is available for up to a maximum of 16 documents depending on the size of your documents.
 If you check Auto Crop, you cannot choose PreScan.
1
A4
A4
1
3
4
2 1
2
2
2
42