Setting The Fax Logic (Sending And Receiving Sequence) - Brother MFC-J430W Basic User's Manual

Setting the Fax Logic
(sending and receiving
sequence)
You can change the process of manual fax
send or receive.
If you often send or receive a fax manually
to/from the other party at the end of a
conversation, set the Fax Mode to Easy
Mode.
You can send or receive a fax manually just
simply press Start. If you are a caller, press
Start to send a fax. If you are a receiver,
press Start to receive a fax.
If you set to Advanced Mode:
No matter you are a caller or receiver, you
can choose you will send or receive a fax
manually. When you press Start, the
machine will ask you:
Send/Receive?
If you want to send a fax, press Send.
If you want to receive a fax, press Receive.
Note
Even if you set either Easy Mode or
Advanced Mode and if there is a
document in the ADF, the document in the
ADF will be sent by pressing Start.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
Press a or b to choose Fax Mode.
Press OK.
e
Press a or b to choose Easy Mode or
Advanced Mode.
Press OK.
f
Press Stop/Exit.
1
General information
11
1