Changing fax resolution
The quality of a fax can be improved by
changing the fax resolution.
a
Press
(FAX).
b
Press Options.
c
Press s or t to display
Fax Resolution.
d
Press Fax Resolution.
e
Press s or t to display the resolution
options, and then press the option you
want.
Note
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
Black & White
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than Fine
resolution.
Use when the document has
Photo
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
use the Color Start key to send a fax, the
machine will send the fax using the Fine
setting.
Setting your changes as the
3
new default
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press Options.
c
Press s or t to choose the setting you
want to change, and then press your
new option.
Repeat this step for each setting you
want to change.
d
After changing the last setting, press
s or t to display Set New Default.
e
Press Set New Default.
f
Press OK.
g
Press Yes.
h
Press Stop/Exit.
Sending a fax
(FAX).
3
3
9