Table of Contents
Advertisement
When Loading Envelopes
Envelopes can be loaded in the multi-purpose tray. Use the following procedure to
load envelopes in the multi-purpose tray.
IMPORTANT
The printable envelope types are shown below:
•
- LBP5900SE
(105 mm x 235 mm)
(Envelope Y401 for Canon LBP
- LBP5600SE
Envelope DL
110.0 mm x 220.0 mm
Envelope COM10
105.0 mm x 241.0 mm
* You cannot use envelopes at sizes of DL, COM10, Monarch, and C5 that have a flap
on the short edge.
Do not use the envelopes with adhesive on the surface. This may result in poor print
•
quality or damage to the printer.
When printing envelopes, data cannot be printed within a 10mm margin on all sides of
•
the envelopes. (If you have selected the [Print with Upper Left of Sheet as Starting Point]
check box in the [Finishing Details] dialog box in the printer driver, however, you can
extend the printable area to near the edges of the paper. For more details, see Online
Help in the printer driver.)
Printing speed drops when printing envelopes.
•
NOTE
When printing envelopes, they may be creased.
YOUGATA No.4
/recommended)
*Envelopes of YOUGATA No.4 and YOUGATA No.2
with a flap on the short edge cannot be used.
Envelope Monarch
98.0 mm x 191.0 mm
162.0 mm x 229.0 mm
YOUGATA No.2
(114 mm x 162 mm)
(Envelope Y201 for Canon LBP/
recommended)
Envelope C5
KAKUGATA No.2
(240 mm x 332 mm)
Envelope B5
176.0 mm x 250.0 mm
71
Advertisement
Table of Contents
