2-Sided Printing; Automatic 2-Sided Printing - Canon LBP3310 User Manual

2-sided Printing

This printer is equipped with a function that can perform automatic 2-sided printing.
Plain paper and heavy paper (90 - 120 g/m
used for automatic 2-sided printing.
By using the multi-purpose tray, you can perform manual 2-sided printing (printing
the other side of previously printed paper) on paper unavailable for automatic

2-sided printing.

IMPORTANT
You cannot perform automatic 2-sided printing on heavy paper (121 - 163 g/m
•
transparencies, labels, Index Card, and envelopes.
5
During automatic 2-sided printing, do not touch the paper until it is output to the
•
face-down output tray completely. The paper is first output partially after the front side is
printed, and then it is fed again to be printed on the reverse side.
Be sure to close the output selection cover before performing automatic 2-sided printing.
•
NOTE
In cases such as where the last page for the 2-sided printing is 1-sided printing,
specifying the following setting allows you to print faster than normal 2-sided printing.
1. Click [Finishing Details] in the [Finishing] sheet.
2. Click [Advanced Settings] in the [Finishing Details] dialog box.
3. Select the [Print Last Page in 1-sided Mode when 2-sided Printing is Set] check

Automatic 2-sided Printing

1
5-10 2-sided Printing
box.
However, when performing 2-sided printing on punched paper or previously printed
paper, the orientation or printing surface of the last page may differ from other
pages. In this case, clear the check box.
Load paper in the multi-purpose tray or paper cassette.
NOTE
On automatic 2-sided printing, the reverse side of the paper is printed first,
therefore the paper should be loaded in the opposite orientation to that for 1-sided
printing. If printing on such paper with letterheads, in which faces and directional
orientations are specified, see "Paper Loading Orientation" (p. 3-49) and load the
paper in the proper orientation.
2
) of A4, Legal, and Letter sizes can be
2
),