Canon BJC-85 User Manual page 47

4
Slide the paper guide to the edge of the stack.
Make sure that the paper guide is not too tight against the side of the stack.
If there is a gap between the paper guide and the stack, or if the paper
guide is too tight, the paper may feed incorrectly.
Note
The number of sheets that you can load depends on the paper or special
print media that you are using. However, in conditions of high humidity if
you experience problems with paper feed, reduce the number of sheets in
the auto sheet feeder.
5
Set up the print job with the printer driver and start the print job.
You can change paper size, paper type, and other important settings in the
printer driver.
Printing With Windows
Printing With Macintosh
Loading Paper in the Printer
Printing 46