Using Infrared Data Transmission - Canon BJC-85 User Manual

Note
If you are using Windows 95, you need IrDA 1.0 with a maximum baud rate
of 115.2 kbps, and the Microsoft infrared port driver Version 2.0.
For details about installing the infrared port, refer to your computer
documentation.
I Confirming That the Infrared Transmission Driver Has Been Installed
1
Click Start, select Settings, and click Control Panel to open the Control
Panel Window.
2
Look at the Control Panel window and confirm that the Infrared Monitor
icon is displayed.
If the Infrared Monitor icon is displayed, the required infrared transmission
driver is already installed.
If the Infrared Monitor icon is not displayed, refer to your Windows
documentation for instructions on installing the infrared driver.
I Using Infrared Data Transmission
Note
To set up infrared data transmission, refer to your computer
documentation.
1
Make sure the universal AC adapter is connected securely.
2
Open the top cover.
Setting Up and Using a Wireless Connection
Getting Ready to Print 30