Back Print Film - Canon BJC-2100 User Manual

Back Print Film

This is semi-transparent film used for backlit display. Printed images are reversed
(mirrored).
• Do not use the BC-22e Photo BJ Cartridge when printing back print films.
• Load back print film with the printing side (the rougher side) facing up.
• Place a piece of plain paper in the sheet feeder behind the back print film.
• You can load up to 10 sheets at one time in the sheet feeder.
• Select Back Print Film as the Media Type setting in the printer driver.
• After printing, remove each sheet from the output tray as it is ejected.
• Allow about 15 minutes for the ink to dry.
Note To avoid smudging and prevent printed sheets of back print film from
sticking together, place a sheet of uncoated plain paper between each
sheet of back print film. When storing a single sheet of back print film in a
plastic folder, place sheets of plain paper on both sides of the film.
Print Side
(Rough Side)
Plain Paper
Paper Handling 48