Table of Contents
Advertisement
4. MECHANICAL SYSTEM
XII.C.F.F. DRIVE/
ELECTRICAL SYSTEM
A. C.F.F. Controller PCB
1) Remove the original stacking tray.
2) Remove the three mounting screws q, w, and
e; then, remove the grip cover r.
1
Figure 4-1201
Caution:
The screw e is a self-tapping screw; take
care not to tighten it excessively.
3) Remove the microswitch actuator t.
Figure 4-1202
4-100
COPYRIGHT © 1996 CANON INC.
4
2
3
5
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Remove the mounting screw y, and remove
the arm u.
6
7
6
Figure 4-1203
5) Disconnect the connector of the C.F.F. con-
troller PCB i; then, remove the PCB.
Figure 4-1204
6
6
8
Advertisement
Chapters
Table of Contents
