7. Removing the Primary Charging Exhaust
Fan (FM9)
1) Remove the control panel (p. 4-4)
2) Remove the two mounting screws q, and dis-
connect the connector w; then, remove the
primary charging exhaust fan e.
3
Figure 4-122
8. Removing the Scanner Motor Cooling Fan
(FM8)
1) Remove the rear upper right cover.
2) Remove the mounting screw q, and move the
harness rail w downward.
3) Remove the two mounting screws e, and dis-
connect the connector r; then, remove the
scanner motor cooling fan assembly t.
2
1
Figure 4-123
COPYRIGHT © 1996 CANON INC.
2
1
5
4
3
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
9. Removing the Fixing Cooling Fan (FM2)
1) Remove the rear right cover and the rear
upper left cover.
2) Remove the two mounting screws q, and dis-
connect the connector w; then, remove the fix-
ing cooling fan e.
2
3
Figure 4-124
4. MECHANICAL SYSTEM
1
4-9