Loading The Product; Defrosting; Alarms; General Description - Electrolux SMART 727027 Installation And Operating Instructions Manual

"roll-in smart" electronic control
Hide thumbs Also See for SMART 727027:
Table of Contents

Advertisement

C.1.5 LOADING THE PRODUCT
Food must be evenly distributed inside the chamber (away
from the door and back wall) in order to allow proper circulation
of air.
There is a sticker inside the chamber indicating the maximum
level of loading:
Cover or wrap food before placing it in the refrigerator and
avoid putting hot foods or steaming liquids inside. Do not
leave the door open longer than necessary when putting in or
taking out products.
It is advisable to keep the keys in a place accesible only to
authorized personnel. In order to avoid the use of the appliance
by non-authorized people, it is advisable to lock it.
C.1.6 DEFROSTING
- Automatic defrosting
The appliance is equipped with an automatic defrost function.
This function is indicated by the "dEFr" indicator light.
Defrost water is routed to a bowl, from where it evaporates
automatically.
- Manual defrosting
The defrost cycle can be activated manually by pressing the
MANUAL DEFROST/UP button for 5 seconds
During this function the "dEFr" indicator light stays on.
C.1.7 ALARMS
C.1.7.1 General description
We have available in the electronic board 2 type of alarm system:
- the HACCP
- the SERVICE ALARMS
The HACCP stores and manages the MAXIMUM CHAMBER
HIGH TEMPERATURE ALARMS.
The SERVICE ALARMS stores and manages all the alarms
available in the electronic board (except the "chamber high
temperature" alarm).

HACCP

C.1.7.2 HACCP
· ALARM CONDITIONS
- the display shows an alarm by the label "TEMP"
- pushing
HACCP
you get information on maximum temperature, time and date
(day, month and year) alarm occured.
There are two possible situations:
a) the alarm is running
b) the alarm has occured
a) the alarm is running
77˚/25˚ Temperature ˚F/˚C
68˚/20˚
59˚/15˚
50˚/10˚
41˚/5˚
HOW TO CHECK IT?
display:
rolling label
i.e. "TEMP 78.8F / 26C"
buzzer:
ON sound alarm
WHAT IS RECORDED?
HACCP
Press
again for 5 seconds and the alarm is showed (AL1).
HACCP
Press
date are shown by a rolling label: "TEMP 78.8F/26C Start 17.05
10-10-99 End----".
15
Critical temperature
Critical temperature
17:05
: the buzzer is going OFF; then press
again: temperature, starting time and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart 727028Smart ri17re1fuSmart ri93re1feu727027

Table of Contents

Save PDF