Table of Contents
Advertisement
10. Gently open the retaining clip on each end of the DIMM connector. Turn the
11. Insert the DIMM into the connector. Firmly press the DIMM straight down into
12. If you have other options to install do so now.
13. Return the computer to the upright position, go to "Completing the installation"
52
IBM IntelliStation M Pro Type 9229: User's Guide
8. Gently open the retaining clips and, if necessary, remove any existing DIMM.
Attention:
To avoid breaking the retaining clips or damaging the DIMM
connectors, open and close the clips gently
9. Touch the static-protective package that contains the DIMM to any unpainted
metal surface on the computer. Then, remove the new DIMM from the
package.
DIMM so that the pins align correctly with the connector.
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips and
remove the DIMM; then, reinsert it.
on page 53.
Advertisement
Table of Contents
