Connecting Either The Diagnostic Cable (1) Or The I/O Cable (2) To A Server Blade - HP BL20p - ProLiant - G2 Setup And Installation Manual

3. Connect the server blade connector to the server blade.
CAUTION: Disconnect the Diagnostic cable or the I/O cable from the port when not
in use. The port and connector do no provide permanent connections.
CAUTION: Rear iLO connector performance degrades when the I/O cable or the
diagnostic cable is in use, even when the iLO connector on the cable is not in use.
CAUTION: Always match the I/O cable labeled with the I/O icon to the I/O port also
labeled with the I/O icon. The Diagnostic cable and port have no labels. Mismatched
cables prevent proper connection and can cause damage.
Figure 1-25: Connecting either the diagnostic cable (1)
or the I/O cable (2) to a server blade
CAUTION: For the Diagnostic Cable, the locking buttons are located on the top of
the server blade connector.
For the I/O cable, the locking buttons are located on the sides of the server blade
connector.
Always be sure to squeeze the locking button(s) on the server blade connector
before disconnecting the diagnostic cable or the I/O cable from the diagnostic or I/O
port. Failure to do so can result in damage to the equipment.
HP ProLiant BL20p Generation 2 Server Blade Setup and Installation Guide
Installing the Server Blade and Options
1-33