Install Battery; Remove Battery; Charging Your Battery - Pantech Verse User Manual

Hide thumbs Also See for Verse:
Table of Contents

Advertisement

Available languages

Available languages

INSTALL BATTERY

1. Insert your finger tip into the slot (1), then push down on
top of the battery cover and slide it off to remove (2).
2. Slide the battery into the slot (3) by aligning the contacts
and press down (4) until you hear the "click".
1-800-822-8837)
reciclaje
de
ejemplo:Número
(Por
adecuada
forma
en
properly
1-800-822-8837)
of
dispose
number
o
T
fire.
(Ex:Recycling
to
expose
or
eliminar
Para
fuego.
al
exponga
ni
incinere
No
incinerate
not
Do
terminals.
battery
the
circuit
batería.
hagan
la
o
de
contacto
terminales
en
entren
los
con
metal
cortocircuito
de
objetos
short
or
.
contact
disassemble
to
objects
metal
not
Do
allow
).
/60
not
(140
Do
que
permita
No
desensamble.
No
).
/60
temperature
high
to
expose
not
Caution:Do
(140
temperatura
alta
a
exponga
No
Cuidado:
1-800-822-8837)
recyclage
de
(Ex:numéro
adéquatement
rebut
au
mettre
Pour
court-circuiter.
brûler.
les
faire
ni
pile
ni
de
bornes
incinérer
les
pas
avec
Ne
contact
en
venir
métaliques
objets
des
laisser
pas
Ne
.
démonter
pas
Ne
).
/60
(140
élevées
atures
tempe
des
a
exposer
pas
Ne
Attention:
Correct
3. Align the cover tabs with the slots on the back of the device
(1) and slide the battery cover onto the unit until it snaps
into place (2).
If the battery is not correctly placed in the compartment, the handset will not turn on
and/or the battery may detach during use.
Correct
16
Incorrect
Incorrect

REMOVE BATTERY

1. To remove the battery cover, insert your finger tip into the
slot (1), then push down on top of the battery cover and
slide it off (2).
2. Insert your fingernail into the slot and lift the battery (3),
and pull the battery (4).
3. Align the cover tabs with the slots on the back of the
device and slide the battery cover onto the unit until it
snaps into place.

CHARGING YOUR BATTERY

1. Connect the USB data cable into the cableless wall
adapter.
2. Plug the USB data cable into the phone' s Charging/Data
Port (making sure to align the connector as it appears in
the image to the right) and the wall adapter end into an
electrical outlet.
• If the battery connector is not properly aligned, damage could occur to the charging
connector and the phone may not charge.
• The main plug is used as the disconnect device and remains readily operable.
01
02
03
04
05
06
07
17

Advertisement

Chapters

Table of Contents
loading

Table of Contents