Replacing The Battery - Panasonic Viera UT50A series Operating Instructions Manual

Ut50a/xt50a/ut50z series
Hide thumbs Also See for Viera UT50A series:
Table of Contents

Advertisement

Replacing the battery

When the battery is running low, the indicator lamp flashes 5 times on turning the 3D Eyewear on.
In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the waste disposal regulations in your local area.
1
Loosen the screw and remove the cover using with a precision Phillips (No.0, plus + ) screwdriver
The screw is not removed from the cover.
2
Replace the battery
If difficulty, remove it with the tip of the driver.
3
Replace and fasten the cover
Use the specified type of battery (coin-shaped lithium
battery CR2025).
Note the correct polarity (+ or -).
Push the cover firmly until it clicks
Tighten the screw
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents